Aggregator

1 week 5 days ago

San Diego International Airport has unveiled the $3.8 billion Terminal 1, which spans 1.16 million square feet and was design --

��app Careers Feed

1 week 6 days ago

Nationwide, Job Title Project Engineer Job Description Summary Preparation and implementation of QA/QC policies and procedures Carry out audits for ISO 9001, 14001 and OHSAS 18001 and recommend the necessary corrective actions and measures Job Description Asst. Manager / Sr. Engineer / Engineer â“ QA/QC This role is responsible for the implementation and maintenance of the quality management system. About the Role: Preparation and implementation of QA/QC policies and procedures Carry out audits for ISO 9001, 14001 and OHSAS 18001 and recommend the necessary corrective actions and measures Monitor policies and procedures and report any areas where improvement is required Assist the Project/Construction Managers in reviewing the contractorâ™s specific quality plans and produce recommendations Ensure timely and effective resolution for QA or QC issues, in coordination with Construction Manager/Consultant/Department Head Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site. Carry out inspection and checking for all quality related procedures in the site and ensure activity at the site are as per approved method statement and inspection test plan. Coordinate with the contractorâ™s representative and Site Engineer in charge for inspection and meeting about quality problems including the closure of Non-Compliance Report. Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and Site Instruction, SI. Responsible for the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations. Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project. Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP. Liaise with Contractors quality Engineer for submission of material submittals to Consultant. About You: B.E Civil with 5 to 10 years of experience of QA/QC in construction industry Technical awareness of civil, electro-mechanical, and architectural works Excellent organizational and motivational skills Outstanding attention to detail and observation ability Exceptional communication and interpersonal abilities Why join Cushman & Wakefield? As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from; Being part of a growing global company; Career development and a promote from within culture; An organisation committed to Diversity and Inclusion We're committed to providing work-life balance for our people in an inclusive, rewarding environment. We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program. We have a vision of the future, where people simply belong. That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, sex, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us. INCO: âœCushman & Wakefieldâ

��app Careers Feed

1 week 6 days ago

St. Louis, Missouri, Job Title Project Coordinator Job Description Summary The Project Coordinator supports the successful delivery of construction projects by coordinating schedules, tracking budgets, managing documentation, and facilitating communication among stakeholders. This role ensures alignment between project teams, vendors, and clients, while maintaining compliance with safety and quality standards. Ideal candidates thrive in fast-paced environments and bring strong organizational and problem-solving skills. Job Description Position Summary Supports project managers and field teams in the planning, execution, and closeout of construction projects. Coordinates project documentation, schedules, and communication to ensure timely and cost-effective project delivery. Acts as a liaison between internal teams, clients, contractors, and vendors to maintain alignment and transparency. Essential Functions and Responsibilities Assist in the preparation and maintenance of project schedules, budgets, and reports. Track project milestones, deliverables, and deadlines using project management tools. Maintain and organize project documentation including contracts, RFIs, submittals, and change orders. Coordinate meetings, prepare agendas, and document meeting minutes and action items. Support procurement processes by tracking materials, vendor contracts, and delivery schedules. Ensure compliance with safety, quality, and regulatory standards throughout the project lifecycle. Facilitate communication between project stakeholders to resolve issues and maintain progress. Coordinate with utility providers to support service disconnections, relocations, and new installations, ensuring alignment with project schedules and jurisdictional requirements. Assist with project closeout activities including punch list tracking, collection of warranties and as-built drawings, and preparation of final turnover documentation for clients. Key Competencies Client Focus Communication Proficiency (oral and written) Relationship Management Leadership Multi-Tasking Technical Proficiency Organization Skills Time Management High Level of Autonomy Important Education Associateâ™s or Bachelorâ™s degree in Construction Management, Engineering, Architecture, or a related field preferred. Project Management certification (PMP) is a plus but not required. Important Industry Experience 1â“2 years of experience in a facilities management, construction or project coordination role. Experience supporting commercial, retail, healthcare, or industrial construction projects. Familiarity with construction project lifecycles, permitting processes, and subcontractor coordination. Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or emailÂ . Please refer to the job title and job location when you contact us. INCO: âœCushman & Wakefieldâ

��app Careers Feed

1 week 6 days ago

Hyderabad, India, Job Title Manager QA/QC (High Rise Building) Job Description Summary This role is responsible for the preparation, implementation, and maintenance of the quality management systems throughout the project lifecycle. Job Description About the Role: Preparation and implementation of QA/QC policies and procedures. Carry out audits for ISO 9001, 14001 and OHSAS 18001 and recommend the necessary corrective actions and measures. Monitor policies and procedures and report any areas where improvement is required. Assist the Project/Construction Managers in reviewing the contractorâ™s quality specific plans and produce recommendations. Review project plans, drawings, and technical specifications to ensure they meet quality standards and regulatory requirements. Ensure timely and effective resolution for QA or QC issues, in coordination with Construction Manager/Consultant/Department Head. Perform daily inspection and test of all the scopes and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site. Carry out inspection and checking for all quality related procedures at the site and ensure all activities at the site are executed as per approved method statement and inspection test plan. Coordinate with the contractorâ™s representative and Site Engineer-in-charge for inspection and conduct meeting about related to quality problems including the closure of Non-Compliance Report. Taking care of QA/QC documents of the entire project including certificates, calibrations, test results, inspection requests, non-compliance reports and site instructions/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and Site Instruction, SI. Responsible for the quality and workmanship of every activity and must have thorough knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations. Develop method statement for the activity including risk assessment, job safety environmental analysis, Inspection Test Plan and Checklist based on specifications of the project. Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP. Liaise with Contractorâ™s quality Engineer for submission of material submittals to Consultant. Implement quality training programs for project teams and subcontractors to enhance awareness and adherence to quality standards. Prepare and present quality performance reports and metrics to senior management and stakeholders. Qualification Criteria B.E Civil with 5 to 10 years of experience of QA/QC in construction industry In-depth knowledge of construction processes, materials, and quality control principles. Technical awareness of Civil, MEP, HVAC, and Architectural works. Excellent organizational and motivational skills. Outstanding attention to detail and observation ability. Exceptional communication and interpersonal abilities. Ability to lead and motivate teams to achieve quality objectives. Certification in Quality Management (e.g., Certified Quality Manager, Lean Six Sigma) is a plus. Why join Cushman & Wakefield? As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from; Being part of a growing global company; Career development and a promote from within culture; An organisation committed to Diversity and Inclusion We're committed to providing work-life balance for our people in an inclusive, rewarding environment. We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program. We have a vision of the future, where people simply belong. That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, sex, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us. INCO: âœCushman & Wakefieldâ

��app Careers Feed

1 week 6 days ago

North Carolina, SteelFab of Virginia, Inc., seeks VDC Coordinator (Raleigh, NC) Duties: Play a key role in supporting the implementation and coordination of Virtual Design and Construction (VDC) processes for steel construction projects. Data Management: Organize and manage digital project data, not limited to building design models, schedules, and drafting related cost tracking specifically to VDC coordination efforts, ensuring all stakeholders have access to the latest information. Project Documentation: Manage the storage, distribution, and data integrity of iterative model exports that are used for clash detection and 3D visual planning of steel structures. Technology Integration: Support the integration of VDC technologies such as 3D modeling, laser scanning, and surveying of steel construction of existing SteelFab SOPs for project management and delivery. Clash Detection & Issue Resolution: Assist in identifying and resolving steel related design and construction obstacles (physical interferences) through BIM with MEP, cladding, architects, structural engineers, and other trades to facilitate interdisciplinary collaboration. Training & Support: Provide support to external project teams on the use of VDC tools, software, and processes. Train internal project managers on VDC software and processes. Supervise new Project Engineer’s training to extract budgeting information from structural steel models from external designers using BIM & VDC methods. Reporting & Analysis: Prepare regular reports on percentage completion of implementation, ongoing issues, and outstanding coordination with VDC efforts on active projects. Detailing Development: Assist with onboarding and training of new steel detailing (drafting/modeling) vendors to get up to par on 3-D model creation and metadata within steel models with to meet contractual expectations. Serve as an ambassador of SteelFab to AISC to identify trends and emerging needs related to VDC education, implementation, and risk mitigation in the steel construction industry. Required: Bachelor’s degree in Material Science, Engineering or related field plus 3 years of experience in the job offered, as project engineer or related position within the construction or engineering industry. Must have 3 years of experience with: BlueBeam, Revit, Tekla, Navisworks and AutoCAD. Reading and interpreting technical drawings (fabrication drawings, blueprints and/or equipment data sheets). Structural steel construction management or estimating. Working with IFC (Industry Foundation Class) files. Submit resumes to AAkkus@steelfab-inc.com , must reference position.

����app

Aggregator

��app